Hifi Enthusiast Portal
7.1.2 Sketch
AV Tutorial

7.1.2 Speaker Placement

A 7.1.2 system uses 2 ceiling speakers in additional to a basic 7.1 system. For the requirement of 7.1.2 ceiling speakers, they are not easy to fit for apartment but better for house.

For the 7.1.2 system, it consists of:

Item #DescriptionRemarks
1Surround Sound Processor / AMP
2Center Speaker1 set
3Left / Right Speaker1 for each side (L/R)
4Left / Right Surround Speaker1 for each side (L/R)
5Left / Right Back Speaker1 for each side (L/R)
6Left / Right Ceiling Speaker1 for each side (L/R)
7Subwoofer1 set

7.1.2 Sketch

NOTES: for items 2-5, they are totally 7 normal speakers as 7 with the subwoofer as the “.1” and final “.2” refers to 2 additional speakers in-ceiling.

Let’s take a look on the floor-plan of the 7.1.2 theater.

7.1.2 Floor Plan

The installation suggestion is based on the information available from the Dolby Lab.  With our experience, it should be fine-tuned for every listening room.  The key is the positioning as the angle of the speaker position and the physical height of the speakers.

To take an example, a room with wooden wall should be sounded very well.  Further adjustment will be necessary for a brick wall.  In order to build the best-fit system, you need to set your height and position of each speaker with the help of the AV system.  Then, you have to compare the effects when sitting down at your seat by playing the same track until the most comfortable one.

With the additional speakers are installed under the ceiling, the ceiling height for the listening room should be considered.  It is better to have 7.5 to 12 feet suggested by Dolby lab.  In real practice, it is suggested to have 10 feet or above.

Also, the 3-D plan is being shown below:

Leave a Reply